Mechanical seals are produced in series the following types:
The package includes mechanical seals and spare parts to them.
Mechanical seals can be equipped with pneumatic hydraulic accumulator.
The general technical requirements on manufacturing of mechanical seals are defined by Specs. 26-01-1032-88.
Seal Type | Operating pressure in apparatus | Working temperature in apparatus’s environment | Shaft Speed, rpm | Note
| |
excessive, max. | residual, min. | ||||
MPa (kgf/cm2) | Pa (mmHg) | 0С | с-1(об/мин) | ||
Т1(ТТ) | 0,3 (3) | 39990 (300) | from +10 | 5,3 (320) | shaft diameter from 40 to 80 mm |
Т2(ТСК) | 0,6 (6) | 2666 (20) | from -30 | 11,6 (700) | shaft diameter from 40 and 50 mm |
0,6 (6) | 666,5 (5) | 8,3 (500) | shaft diameter from 50 and 65 mm | ||
Т3(ТД) | 2,5 (25) | 2666 (20) | 6,6 (400) | shaft diameter from 80 and 95 mm | |
3,2 (32) | 5,3 (320) | shaft diameter from 110 and 130 mm | |||
Т4(ТДП) | 2,5 (25) | 666,5 (5) | 8,3 (500) | shaft diameter from 50 and 65 mm | |
3,2 (32) | 5,3 (320) | shaft diameter from 110 and 130 mm | |||
Т5(ТДФ) | 0,6 (6) | 2666 (20) | 8,3 (500) | shaft diameter from 50 and 65 mm | |
Т8(ТДМ) | 1,6 (16) | 25 (1500) | operating pressure to 0,6 MPa | ||
3,2 (32) | 8,3 (500) | shaft diameter from 50 and 65 mm |